De Pala srl
Reserved Area
It En De

Product groups

Categories / Product subcategories

"ISO" with connection 5211 IP 65 from ½" to 4" threaded or flanged

Nickel-plated 3-way coplanar diverter valve T bored

Nickel-plated 3-way coplanar diverter valve T bored
Nickel-plated 3-way coplanar diverter valve T bored

Description

The valves are made of brass according to criteria of toughness and durability. The full bore ball shutter guarantees minimum pressure drop and no leakage even after long periods of use. The connections can be female threaded or flanged PN16 UNI EN 1092-1, depending on the practicality of installation. The 3-way valves have different flow configurations, adapting to a wide range of installation needs.


The servomotors have a robust steel gearbox and are equipped with a terminal board for easy electrical connection. De Pala actuators only absorb current during operation, unlike, for example, spring-return servomotors, and have accurate and repeatable positioning.
Thanks to the ISO  5211 standard plug-in connection, the servomotors can be coupled to any valve that has a compatible flange and square.


Optionally, the servomotor can be ordered with an auxiliary contact.
This is a free contact, not under voltage, useful for example to activate the boiler when the valve opens, to signal the open-closed status at a distance by using a light bulb, or for other functions. On request, De Pala can supply servomotors with two auxiliary contacts, with closed contact when the valve is closed and in other variants.

Technical Data

VALVE BODY:


Body : BRASS CW617N Nickel-Plated (CB754S Nickel-Plated 3-Ways FLANGED valves)
Ball : BRASS CW6174 ( UNI 12164 ) Chromium-plated
SEALS on the ball and on the rod : P.T.F.E. and EPDM O-RINGS
Rod : DRAWN BRASS CW614N (UNI 12164) with double O-RING in EPDM and anti-seize ring in PTFE
Nominal operating pressure : 16 bar / 25 bar  / 40 bar (depending on the valve type and dimension)
Maximum differential operating pressure : 6 bar
Fluid temperature range : FROM -10 °C TO 100 °C (for extreme values the use of a spacer is recommended)
Usable fluids : WATER or Fluids which are compatible with PTFE and EPDM rubber
Load loss : no effect (TOTAL FLOW TYPE)
Servomotor attachments: ISO 5211
REVOLVING flanged ends:  UNI EN 1092-1 (PN 16)


COUPLED SERVOMOTORS:


Opening / closing time: 60" - 180" (other speeds upon request)
Supply Voltage: 230 VAC - 24 VAC (12VDC and 24VDC on request)
Control type: 2 wires relay inside / 3-wire deviation
One or two auxiliary switches available.
Electric protection level: IP42 / IP54 / IP65

 

Heating resistor on request

Request Informations

Related Product Codes

T7IC9: 

FREEZE MOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -24VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"
T7IB9: 

FREEZE MOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -230VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"
P7IC9: 

FREEZE MOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -24VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"
P7IB9: 

FREEZE MOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -230VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"
673FT: 

3-WAYS BALL VALVE - DN 80 FLANGED COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q14
673TI: 

3-WAYS BALL VALVE - DIAM. 3" FEMALE COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q14
653TI: 

3-WAYS BALL VALVE - DIAM. 2" FEMALE COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11
643TI: 

3-WAYS BALL VALVE DIAM. 1" 1/2 FEMALE COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11
623TI: 

3-WAYS BALL VALVE DIAM. 1" 1/4 FEMALE COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F03 SHAFT Q09
613TI: 

3-WAYS BALL VALVE DIAM. 1" FEMALE COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F03 SHAFT Q09
603TI: 

3-WAYS BALL VALVE DIAM. 3/4" FEMALE COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F03 SHAFT Q09
633TI: 

3-WAYS BALL VALVE DIAM. 1/2" FEMALE COPLANAR TYPE - DEVIATING "T" BORED ISO 5211 ATT. - FLANGE F03 SHAFT Q09
M8IB9P: 

SERVOMOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
M8IC9P: 

SERVOMOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
R8IB9P: 

SERVOMOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
R8IC9P: 

SERVOMOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
M8IE9P: 

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
M8IF9P: 

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24 VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
R8IE9P: 

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
R8IF9P: 

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24 VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"
M9IB9: 

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -230VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"
M9IC9: 

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -24VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"
R9IB9: 

SERVOMOTOR 2-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -230VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"
R9IC9: 

SERVOMOTOR 2-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -24VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"
technical support +39 0434 920466

Related Products