De Pala srl
It En De

Frontal 3-way diverter valve L bored - nickel plated

Frontal 3-way diverter valve L bored -  nickel plated
Frontal 3-way diverter valve L bored -  nickel plated

Description

The valves are made of brass according to criteria of toughness and durability. The full bore ball shutter guarantees minimum pressure drop and no leakage even after long periods of use. The connections can be female threaded or flanged PN16 UNI EN 1092-1, depending on the practicality of installation. The 3-way valves have different flow configurations, adapting to a wide range of installation needs.


The servomotors have a robust steel gearbox and are equipped with a terminal board for easy electrical connection. De Pala actuators only absorb current during operation, unlike, for example, spring-return servomotors, and have accurate and repeatable positioning.
Thanks to the ISO  5211 standard plug-in connection, the servomotors can be coupled to any valve that has a compatible flange and square.


Optionally, the servomotor can be ordered with an auxiliary contact.
This is a free contact, not under voltage, useful for example to activate the boiler when the valve opens, to signal the open-closed status at a distance by using a light bulb, or for other functions. On request, De Pala can supply servomotors with two auxiliary contacts, with closed contact when the valve is closed and in other variants.

Technical Data

VALVE BODY:


Body : BRASS CW617N Nickel-Plated (CB754S Nickel-Plated 3-Ways FLANGED valves)
Ball : BRASS CW6174 ( UNI 12164 ) Chromium-plated
SEALS on the ball and on the rod : P.T.F.E. and EPDM O-RINGS
Rod : DRAWN BRASS CW614N (UNI 12164) with double O-RING in EPDM and anti-seize ring in PTFE
Nominal operating pressure : 16 bar / 25 bar  / 40 bar (depending on the valve type and dimension)
Maximum differential operating pressure : 6 bar
Fluid temperature range : FROM -10 °C TO 100 °C (for extreme values the use of a spacer is recommended)
Usable fluids : WATER or Fluids which are compatible with PTFE and EPDM rubber
Load loss : no effect (TOTAL FLOW TYPE)
Servomotor attachments: ISO 5211
REVOLVING flanged ends:  UNI EN 1092-1 (PN 16)


COUPLED SERVOMOTORS:


Opening / closing time: 60" - 180" (other speeds upon request)
Supply Voltage: 230 VAC - 24 VAC (12VDC and 24VDC on request)
Control type: 2 wires relay inside / 3-wire deviation
One or two auxiliary switches available.
Electric protection level: IP42 / IP54 / IP65

 

Heating resistor on request

Related Product Codes

P7IC9

FREEZE MOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -24VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"

P7IB9

FREEZE MOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -230VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"

663FF

3-WAYS BALL VALVE - DN 65 FLANGED FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q14

66ALI

3-WAYS BALL VALVE DIAM. 2"1/2 FEMALE FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q14

653FF

3-WAYS BALL VALVE - DN 50 FLANGED FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11

643FF

3-WAYS BALL VALVE - DN 40 FLANGED FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11

65ALI

3-WAYS BALL VALVE - DIAM. 2" FEMALE FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11

64ALI

3-WAYS BALL VALVE - DIAM.1"1/2 FEMALE FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11

62ALI

3-WAYS BALL VALVE - DIAM.1"1/4 FEMALE FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11

61ALI

3-WAYS BALL VALVE - DIAM. 1" FEMALE FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F05 SHAFT Q11

60ALI

3-WAYS BALL VALVE - DIAM. 3/4" FEMALE FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F03 SHAFT Q9

63ALI

3-WAYS BALL VALVE - DIAM. 1/2" FEMALE FRONTAL TYPE - DEVIATING "L" BORED ISO 5211 ATT. - FLANGE F03 SHAFT Q9

T7IB9

FREEZE MOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -230VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"

T7IC9

FREEZE MOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 FLANGE F03 SHAFT Q9 -24VAC FOR 2/3-WAYS VALVES DIAM.1/2"-3/4"-1"

M8IB9P

SERVOMOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

M8IC9P

SERVOMOTOR 3-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

R8IB9P

SERVOMOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

R8IC9P

SERVOMOTOR 2-WIRES - 1AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

M8IE9P

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

M8IF9P

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24 VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

R8IE9P

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 230VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

R8IF9P

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 - F05 Q11 - 24 VAC - IP65 FOR 2/3-WAYS VALVES  DIAM. 1"1/4 - 2"

M9IB9

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -230VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"

M9IC9

SERVOMOTOR 3-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -24VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"

R9IB9

SERVOMOTOR 2-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -230VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"

R9IC9

SERVOMOTOR 2-WIRES - 2AUX SW. 60"x90° ISO 5211 FLANGE F05 SHAFT Q14 -24VAC FOR 2/3-WAYS VALVES DIAM. 2"1/2-3"-4"

technical support +39 0434 920466

Related Products